Knives and Tools: Ready Answers
How do I make a knife from an old file?
Quick answer
Start with an old high-carbon file, soften it in a fire so you can work it, then shape the blade, form the edge, and harden and temper it. Fit a hardwood handle and sharpen it razor sharp. Wear eye, ear and hand protection, and work slowly. Your first knife is for learning.
Quick answer: Start with an old high-carbon file, soften it in a fire so you can work it, then shape the blade, form the edge, and harden and temper it. Fit a hardwood handle and sharpen it razor sharp. Wear eye, ear and hand protection, and work slowly. Your first knife is for learning.
Why an old file works
An old file is made of hard, high-carbon steel, which makes it a great first piece of knife steel. You can find one in the garage, the shed or a yard sale for next to nothing. In our Knife Making 101 series, Joe and I turned a regular file into a Scandinavian puukko-style knife, step by step, with tools a lot of folks already have.
Gear and safety first
- Protection: gloves, non-flammable clothing, eye protection, ear protection and a respirator for grinding dust.
- Shaping tools: a 2 x 42 inch belt sander (or a file on a piece of rod), a grinding wheel, a palm sander and a drill.
- Heat: a small forge or a brick setup with a torch, tongs or pliers, a magnet on a handle, a bucket of water and a container of canola oil.
- Handle and finish: a small piece of hardwood, 5-minute epoxy, Danish oil, a square, a ruler and a marker.
The 10 steps
- 1. Soften the file. Heat it and let it cool slowly so the hard file becomes workable knife steel (this is called annealing).
- 2. Mark and shape. Draw your blade on the steel and grind the profile. Keep the steel cool so you don't ruin it.
- 3. Form the edge. Grind the bevels by hand or with power tools, keeping both sides even.
- 4. Prepare the handle. Drill your hardwood block and burn in the tang so it fits snug.
- 5. Harden. Heat the blade until a magnet no longer sticks, then quench it in warm oil.
- 6. Temper. Bake the hardened blade so it's tough, not brittle.
- 7. Set the edge bevel before final sharpening.
- 8. Shape the handle so it fits your hand.
- 9. Glue up and finish. Sand, oil and glue the handle to the blade.
- 10. Sharpen and strop until it shaves.
Lessons learned
Start simple. On The Survival Show, a custom knife maker's advice for beginners was to learn the basics on a simple, traditional carbon steel before trying fancy modern steels, which are harder to grind and cost more in time and materials. And the best way to find out if you love knife making is to just try it, even a few hours a week. Your first knife won't be perfect, and that's fine. You'll learn more from it than from any video.
Why it matters for survival
Knowing how a blade is made teaches you how to care for one, sharpen one and choose a good one. It also gives you real confidence with tools, and that confidence carries over into every skill in the field.
Watch it
How to Make a Knife From an Old File | DIY Bushcraft Blade | Shaping Your Knife (Ultimate Survival Tips on YouTube)
Related questions
Do I need a forge to make a knife from a file?
You need a heat source that can get the steel hot enough to soften and harden it. A small forge works best, but a brick setup with a torch can work for a small blade.
How do I know the steel is hot enough to harden?
Use a magnet. When the hot steel no longer sticks to the magnet, it's ready to quench in warm oil.
Can a beginner make a usable knife?
Yes. Go slow, follow each step, and expect your first knife to be a learning knife.
Keep it in your pocket
Tiny Survival Guide: Fire, water, shelter and first aid skills on a card that fits in your wallet.
More answers like this: Ready Answers: Knives and Tools
Be prepared, because you never know.
David Polczynski, founder of Ultimate Survival Tips
Related questions
Do I need a forge to make a knife from a file?
You need a heat source that can get the steel hot enough to soften and harden it. A small forge works best, but a brick setup with a torch can work for a small blade.
How do I know the steel is hot enough to harden?
Use a magnet. When the hot steel no longer sticks to the magnet, it's ready to quench in warm oil.
Can a beginner make a usable knife?
Yes. Go slow, follow each step, and expect your first knife to be a learning knife.
Keep it in your pocket
Tiny Survival® Guide
Fire, water, shelter and first aid skills on a card that fits in your wallet.
Be prepared, because you never know.
David, Ultimate Survival Tips