Knives and Tools: Ready Answers

How do I sharpen a knife with a whetstone?

Quick answer

Lay the stone on a flat, non-slip surface, start on the coarse side, and hold one steady angle as you work the whole edge from heel to tip. Keep going until you can feel a small burr along the opposite side, switch sides, then repeat on the fine side and finish on a strop.

Quick answer: Lay the stone on a flat, non-slip surface, start on the coarse side, and hold one steady angle as you work the whole edge from heel to tip. Keep going until you can feel a small burr along the opposite side, switch sides, then repeat on the fine side and finish on a strop.

Why the stone is worth learning

A sharp knife is a safer knife. A dull edge makes you push harder, and that's when blades slip. Once you can put an edge on with a simple stone, you can keep any knife or tool working anywhere, with no power and no gadgets.

Step by step

  • 1. Set up. Put the stone on a flat, stable surface. A grip pad or damp cloth underneath keeps it from sliding.
  • 2. Start coarse. Use the coarse side to restore a dull or damaged edge. Save the fine side for touch-ups and finishing.
  • 3. Find your angle and hold it. Consistency matters more than the exact number. Lock your wrist and keep the same angle on every stroke.
  • 4. Work the whole edge. Move the blade across the stone so every part of the edge, from heel to tip, touches the stone on each pass.
  • 5. Raise a burr. Keep going until you can feel a tiny burr, a rough lip of metal, along the opposite side of the edge. That tells you you've sharpened all the way to the edge.
  • 6. Switch sides. Repeat the same number of strokes on the other side until the burr flips back.
  • 7. Move to the fine side. Repeat with lighter pressure to refine the edge.
  • 8. Strop. Finish on a leather strop, edge trailing, to remove what's left of the burr and polish the edge.

Test it

Slice a sheet of paper. A sharp edge cuts cleanly without tearing. If it snags in one spot, go back to that section of the edge.

Common mistakes

  • Changing the angle mid-stroke. Rocking the blade rounds the edge. Slow down and keep your wrist locked.
  • Skipping the burr. If you switch sides before you can feel a burr, you haven't reached the edge yet.
  • Too much pressure on the fine side. Use lighter strokes as you move from coarse to fine.

Carry a sharpener with you

Your sharpening kit doesn't help if it's at home. I designed the Tiny Knife Sharpener Kit to fit in a wallet: a credit-card-sized, double-sided diamond stone (500 grit on one side, 1000 on the other), a mini leather strop, a grip pad, honing compound and instructions, plus a free sharpening video course.

Watch it

How to Sharpen a Knife with a Stone - to a Shaving Sharp - Knife Sharpening Boot Camp #2 (Ultimate Survival Tips on YouTube)

Related questions

What grit should I start with?

Start coarse to restore a dull or damaged edge, then move to the fine side to refine it. On the Tiny Knife Sharpener Kit, that's the 500 grit side first, then 1000.

How do I know when to switch sides?

When you can feel a small burr along the whole length of the opposite side of the edge. That means you've sharpened all the way to the edge.

Do I need to strop after sharpening?

It's worth it. A few light strokes on leather remove the leftover burr and polish the edge.

Keep it in your pocket

Tiny Survival Guide: Fire, water, shelter and first aid skills on a card that fits in your wallet.

More answers like this: Ready Answers: Knives and Tools

Be prepared, because you never know.
David Polczynski, founder of Ultimate Survival Tips

Related questions

What grit should I start with?

Start coarse to restore a dull or damaged edge, then move to the fine side to refine it. On the Tiny Knife Sharpener Kit, that's the 500 grit side first, then 1000.

How do I know when to switch sides?

When you can feel a small burr along the whole length of the opposite side of the edge. That means you've sharpened all the way to the edge.

Do I need to strop after sharpening?

It's worth it. A few light strokes on leather remove the leftover burr and polish the edge.

Keep it in your pocket

Tiny Survival® Guide

Fire, water, shelter and first aid skills on a card that fits in your wallet.

See the Tiny Survival® Guide

Be prepared, because you never know.
David, Ultimate Survival Tips

More answers: Knives and Tools: Ready Answers