Camping and Adventure: Ready Answers

How do I start a fire with a ferro rod?

Quick answer

Build your fire lay first, with dry tinder, kindling and fuel ready. Put the rod's tip right in the tinder, hold your striker or knife spine steady, and pull the rod back toward you. That keeps the tinder in place and drops hot sparks right where you need them. Then feed the flame gradually.

Quick answer: Build your fire lay first, with dry tinder, kindling and fuel ready. Put the rod's tip right in the tinder, hold your striker or knife spine steady, and pull the rod back toward you. That keeps the tinder in place and drops hot sparks right where you need them. Then feed the flame gradually.

Get everything ready before you strike

Fire needs heat, fuel and oxygen. The rod only gives you heat. Before you strike, gather three sizes of material: tinder (fine, fluffy, dry), kindling about pencil-lead to pencil thickness, and fuel from finger thickness up to wrist thickness. Dead, dry wood that snaps cleanly is what you want. If it bends, it's too wet.

The right way to strike

  • 1. Set up your fire lay. Put dry tinder on a dry base like sticks or a rock, with kindling ready to add.
  • 2. Place the rod. Put the tip of the rod right into the tinder bundle.
  • 3. Hold the striker still. Use the striker or the 90-degree spine of your knife, held steady against the rod.
  • 4. Pull the rod, not the striker. Draw the rod back toward you. Pushing the striker forward tends to knock your tinder apart; pulling the rod keeps everything in place.
  • 5. Feed it slowly. When the tinder catches, add kindling a little at a time, then build up to fuel. Don't smother it.

A tip for tough tinder

If your tinder won't catch, scrape a small pile of shavings off the rod into the tinder first, then throw sparks into the pile. The burning shavings give the tinder a bigger, longer flame.

Carry more than one way to make fire

On The Survival Show we use a 'rule of three' for ignition: carry at least three ways to light a fire, such as a lighter, matches and a ferro rod. A ferro rod is the one that keeps working when it's wet.

Built for the MSK-1

The MSK-1 EDC Firesteel Kit 2.0 has a 1/4 inch (6.3 mm) rod in an aluminum handle, and it bolts onto MSK-1 sheaths. The stand-alone MSK-1 Survival Kit 2.0 also includes a 1.5 inch mini ferro rod and three tinder fuses.

Watch it

How to Start a Fire with Firesteel / Ferro Rod / Flint and a Knife - DYI Survival Basics (Ultimate Survival Tips on YouTube)

Related questions

Can I use my knife to strike a ferro rod?

Yes, if it has a sharp 90-degree spine. Use the spine, never the cutting edge, and hold the knife still while you pull the rod back.

Why won't my tinder catch?

Usually it isn't fine or dry enough. Fluff it up, add a small pile of ferro shavings, and throw sparks into the pile.

Does a ferro rod work when wet?

Yes. Wipe it dry and it will still throw sparks, which is why it belongs in every kit.

Keep it in your pocket

Tiny Survival Guide: Fire, water, shelter and first aid skills on a card that fits in your wallet.

More answers like this: Ready Answers: Camping and Adventure

Be prepared, because you never know.
David Polczynski, founder of Ultimate Survival Tips

Related questions

Can I use my knife to strike a ferro rod?

Yes, if it has a sharp 90-degree spine. Use the spine, never the cutting edge, and hold the knife still while you pull the rod back.

Why won't my tinder catch?

Usually it isn't fine or dry enough. Fluff it up, add a small pile of ferro shavings, and throw sparks into the pile.

Does a ferro rod work when wet?

Yes. Wipe it dry and it will still throw sparks, which is why it belongs in every kit.

Keep it in your pocket

Tiny Survival® Guide

Fire, water, shelter and first aid skills on a card that fits in your wallet.

See the Tiny Survival® Guide

Be prepared, because you never know.
David, Ultimate Survival Tips

More answers: Camping and Adventure: Ready Answers